Cutting: A Simple Process For Sleeve Sleeves Of Women'S Coats.

Women's coat is a popular style of clothing in recent years. Its appearance is simple in structure, smooth in line, comfortable in dress, and has the feeling of casual clothes. This kind of garment is sleeved together with sleeves for cutting and making. Its characteristics are sleeves' spun yarn.

It is very easy to deform. Compared with sleeve clothing, some special methods should be adopted in the process.

Selection of linings

First of all, we must choose the hot melt adhesive lining with thickness, elasticity and texture matching with the fabric.

The process of shaping or molding of the sleeve's skew yarn is made during manufacture.

The reasonable use of the adhesive lining can not only reflect the design style of the garment, but also affect the appearance of the fabric.

In addition, it is possible to reduce manual workmanship and reduce the difficulty in making garments by using the "hot melt adhesive lining" with "sticky stitching" characteristics.

Main methods of process treatment

Sticky stick

Choose the right pick, and do not use the iron to stick to the reverse side of the garment piece as shown in Figure 1-3.

Two. Mark the main parts of the cutting film.

1. According to the size of the sample, the sleeves and the cuffs of the sleeves should be painted separately.

2, according to the location of the painting, the two sides of the front and the left should be marked with the needle of the hand or the drawing board.

Three.

1. The front and back sides of the front and back pieces are aligned opposite to each other, and the shoulder sleeve seams are aligned. The seam is LCM seam. The sewing machine is stitched.

2. Separate the seams of the shoulder sleeves and iron.

The rotator cuff seam of the inside is reversed to the side, and the iron is compacted.

Four, small sleeve seam

1, the size of the face sleeve, the front face is opposite, sleeve seam alignment, LCM seam suture well.

2, separate the good seam and iron.

Pay attention to the intersection point between body and sleeve, do not appear the phenomenon of hair leakage and uneven clothing when cutting the mouth, so as not to affect the quality and appearance effect of the garment.

Then fold the cuff fold according to the sign, and press the iron tightly.

3, aligning the inside and outside sleeves of the sleeves, aligning the sleeves, making the 1cm stitch together, then turning the seam parts to one side and iron smoothing.

Five.

1, face to the inside face, sleeve seam alignment, cuff alignment, LCM seam suture.

2. Double sided adhesive stripe is placed between the sides of the cuffs and the sleeves.

Or the stitch of the hem should be fixed with the needle and the side of the face.